“Educate and inform us and we’ll be fine.”– Tool Tech shop panel

by | May 19, 2022 | 0 comments

A common theme from a shop owner panel and the Equipment and Tool Institute's Tool Tech Conference was "Educate and inform us and we'll be fine."

A common theme from a shop owner panel at the Equipment and Tool Institute’s Tool Tech Conference was “Educate and inform us and we’ll be fine.”

The panel discussion, held as part of the recent Tool Tech event in California, was moderated by Ben Johnson, director of product management for Mitchell 1.

“I was honoured to serve as the moderator for a lively discussion with repair shop owners as we dove into a number of hot industry topics, including the impact that ADAS and electric vehicles are having on shop businesses, the types of repairs that they are seeing now versus 10 years ago and other new technologies that are here or just on the horizon,” said Johnson.  

The panelists included Brian Bowersock, Keith Benline and Randy Waitman, who are owners of automotive repair shops in the San Diego, California area, and have over 100 years of combined experience in vehicle repair and running successful businesses.

The panel also included Lucas Underwood, president of L&N Performance Auto Repair in Blowing Rock, North Carolina.

The California-based repair shops stated they are already seeing a number of electric vehicles and technicians are trained and able to work on them. 

However, they noted that companies such as Tesla, while being the most popular EV on the road, has limited options for access to repair information and parts. 

The panel pointed out that traditional brands have information and parts readily available; however, they are concerned that if companies like Tesla, Rivian and other newcomers don’t make their information available through providers such as Mitchell 1, there will be a long-term impact as these vehicles continue to rise in popularity and age.

Another topic of the panel discussion was the increase in ADAS-equipped vehicles.

One shop owner said they will be adding ADAS calibration capabilities in-house, while the other shop owners cited how expense, low volume and space requirements are driving them to “hub and spoke” relationships with shops that have the space and equipment to perform these calibrations. 

“The resounding message from the panel discussion was that the shop owners need to know what’s coming to their bays and when, as well as the need for service information and training for these new technologies,” said Johnson.

“They recognize the expense of new tools and equipment, but it must be reasonable for them in order to continue effectively serving their communities.”

Johnson is responsible for managing Mitchell 1’s portfolio of products for the motor vehicle industry. He maintains several ASE certifications and is a member of the Society of Automotive Engineers (SAE) International. He currently serves on the Auto Care Association’s Tool & Equipment and Emerging Technologies committees, and on the executive council at the Automotive Aftermarket Suppliers Association (AASA) Technology Council. He is a frequent presenter at industry events on the topic of ADAS and emerging automotive technologies.

Tool Tech focuses solely on automotive-related tool and equipment companies, and the individuals at the forefront of the industry and technological advances. Attendees go to Tool Tech to network with industry insiders, peers, OEM personnel and meet with key companies in the marketplace. For more information about Mitchell 1, visit www.mitchell1.com. Locate an independent sales consultant at www.mitchellrep.com

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *